How To Add Lorex 6100 Series Camera To An Android
- #1
Hi, start post so here goes.
I purchased a lorex 4k nvr w/ 6 cam system from costco and it contains;
1x NVR - LNR6100
6x CAM - LNB8005B
I setup the nvr (poe) and 1 of the cams and this works bully through the NVR and also thru the dDMSS LITE app. I dont need access to remote view over internet, as i have a vpn setup with openvpn on my phone for a secure network. I volition access the cams when not at abode through this vpn. When at home via my usual network /wifi.
I have two issues;
1) I cannot connect to TinyCam Pro on my home wifi. When i try the search network is doesn't find anything. I endeavor the manual settings and although it says photographic camera status 'OK' i cannot view the camera. The one affair i noticed was that the camera protocol in nvr is private, and i created a new feed and inverse the channel to ii and settings to onvif and the condition for this on the nvr shows as offline - does this camera non support onvif i thought it did.
The settings in NVR;
the photographic camera shows ip x.one.ane.thirty
nvr shows : 192.168.1.xxx west/ dhcp on.
ip version: ipv4
lan download: yeah
then in cam settings, remote device, i added camera 1 with three unlike settings /channels;
channel1 - port 35000 , protocol private - this is found on network
channel2 - port 37777 , protocol onvif - this is not found on network
channel3 - port 35000 , protocol onvif - this is not found on network
The settings in TinyCam Pro;
status: OK
enabled: aye
brand: Lorex
model: LNx Series
hostname: 192.168.ane.thirty
web port number: 35000 (default is fourscore)
protocol: server push (mjpeg)
rtsp port number: 554 (default)
username: same as on nvr
pwd: same as on nvr
advanced settings;
autoupdate remote ip address - off
remote hostname/ip address: 192.168.1.30
remote web port number: 35000 (default 80)
remote rtsp port number 554
use https: off
port fwd: n/a
2) The firmware status for the camera says to be upgraded and is on firmware 2.460. How practice i upgrade the firmware? The documentation seems to say that this is done automatically, but there is no firmware for this camera on the lorex website.
help appreciated
thanks
- #2
to add; i as well accept the switch settings turned off because im not certain why thats needed. I tin also view the camera from logging into browser via ip 192.168.1.xxx and i have access to the system setup. its only tinycam pro that doesnt work.
- #3
got information technology resolved, it was tinycam pro settings which had to exist changed to another lorex model or dahua equally brand...
working with lorex back up for the firmware as it wont update over internet.
- #half-dozen
You have to use the actual NVR ip accost not the camera ip, then on tiny cam change the channel to 1,2, etc.
I can post the settings afterwards which piece of work for far...
- #7
This is what'south in tinycam. The first one shows the camera type the 2d image is from advanced settings where u alter the camera numbers.
To note, don't similar connecting to internet for the NVR. Instead I can view thru internal network or via VPN with open up VPN on android and Asus router.
- #8
Obviously you lot change the ip settings to your NVR ip address.
Source: https://ipcamtalk.com/threads/lorex-setup-help-needed.26901/
Posted by: smithpolornet.blogspot.com
0 Response to "How To Add Lorex 6100 Series Camera To An Android"
Post a Comment